+41 (0)32 925-9540           info@greub.ch         GPS :   | |             fr | de | en 
Schaublin Machines SA

Schaublin Machines

Conventional turning - Watchmakers, tool room lathe

Schaublin 70-CF

Schaublin 70-CF
 
SCHAUBLIN Lathes are well-tried and world wide acknowledged for their quality and reliability.

The lathe 70-CF is issued from a long tradition and of great ease of use.

  1. Stepless spindle speed adjustment
  2. Spindle speed pre-selection
  3. High torque at low spindle speed
  4. Digital display of spindle speed
  5. Command for auxiliary functions
  6. Pedals functions with configuration menu
Schaublin 70-CF - Technical specifications
Capacities:Height of centres :70 mm
Maximum distance between centres :275 mm
Bed:Length :600 mm
Height :120 mm
Headstock:For chucks type :12 - W
Spindel bore :Ø 12 mm
Maximum through - bore :Ø 8,2 mm
Carriage:Stroke of longitudinal tool slide :60 mm
Stroke of transverse tool slide :65 mm
Swing over carriage:
without rear tool holder :85 mm
with rear toolholder :45 mm
Height of Centres over carriage :16 mm
Dimensions of tools :8 x 8 mm
Tailstock:Internal spindle taper :2 °
Spindle stroke :45 mm
Spindle Drive:Motor Power1,1 kW
Speed variation by frequency convertor with integral braking
Spindle speed :5000 rpm max.
Controls:Control panel comprising :
Speed pre-selection
Digital spindle speed indication
Configuration of pedal functions by menu
Examples: Spindle Start/Stop - Reverse
Auxiliary functions
Netweight:about 250 kg
Over-all dimensions:Length - depth - height : 1600 x 800 x 1370 mm
with device 202-95000 :1600 x 800 x 1540 mm
 

Bench / Headstock

Schaublin 70-CF Bench / Headstockfixing bolt, T-support, sawing table, perforated-disc dividing attachment, drawbar, arbor for drill, 6-jaw chuck, combined adjustable extractor, faceplate, raised clamp, 3-jaw chuck, hardened driving dogs...

Carriage

Schaublin 70-CF Carriagelever-operated carriage, screw mounted on ball bearing, control lever for bottom slide, turret for MULTIFIX-Aa quick-change, tool holder, cutting-off blade, TRIPAN, milling attachment, Inclinable headstock, quill, dividing head, microscope, grinding attachment, cutting-off carriage...

Tailstock

Schaublin 70-CF TailstockLever-operated drilling tailstock, male and female centre, revolving centre, drilling V, Arbour for drill, drill chuck with automatic gripping, drilling plate...

Schaublin 70 Mi-CF

Schaublin 70 Mi-CF
 
SCHAUBLIN Lathes are well-tried and world wide acknowledged for their quality and reliability.

The lathe 70-CF is issued from a long tradition and of great ease of use.

  1. Stepless spindle speed adjustment
  2. Spindle speed pre-selection
  3. High torque at low spindle speed
  4. Digital display of spindle speed
  5. Command for auxiliary functions
  6. Pedals functions with configuration menu
Schaublin 70 Mi-CF - Technical specifications
Height of centres:70 mm
Max. distance between centres:235 mm
Headstock for collets type:12-W
Maximum through - bore:Ø 8,2 mm
Swing over carriage;
• without rear tool holder85 mm
• with rear toolholder45 mm
Tailstock; internal spindle taper:2°
Spindle drive; motor power:0,75 kW at 2000 min-1
Spindle speed:100-8000 min-1
Net weight, approx.:260 Kg
Voltage:220V Single-Phase
 

Bench / Headstock

Schaublin 70-CF Bench / Headstockfixing bolt, T-support, sawing table, perforated-disc dividing attachment, drawbar, arbor for drill, 6-jaw chuck, combined adjustable extractor, faceplate, raised clamp, 3-jaw chuck, hardened driving dogs...

Carriage

Schaublin 70-CF Carriagelever-operated carriage, screw mounted on ball bearing, control lever for bottom slide, turret for MULTIFIX-Aa quick-change, tool holder, cutting-off blade, TRIPAN, milling attachment, Inclinable headstock, quill, dividing head, microscope, grinding attachment, cutting-off carriage...

Tailstock

Schaublin 70-CF TailstockLever-operated drilling tailstock, male and female centre, revolving centre, drilling V, Arbour for drill, drill chuck with automatic gripping, drilling plate...

Schaublin 102 N-CF

Schaublin 102 N-CF
 
A proven machine which is highly renowned for its advantages and manifold possibilities of use. In this tradition, SCHAUBLIN MACHINES SA has further improved the capacities of the 102N-CF lathes and even simplified their operation. Equipped with W20 collet.

  1. Stepless adjustable spindle speed
  2. Preselection of spindle speeds
  3. High torque at low speed
  4. digital display of spindle speed
  5. Additional controls for auxiliary functions
  6. Pedals functions configuration by menu
Schaublin 102 N-CF - Technical specifications
Capacities
Maximum swing over bed 200 mm
Maximum swing over carriage120 mm
Height of centres over bed102 mm
Height of centres over carriage20 mm
Maximum distance between centres470 mm
Length of the bed1’000 mm
Height of the bed168 mm
Principal spindle ; by AC motor drive
Power continuous1,5 kW
Headstock W20
Spindle for “ScHauBLin” colletsW20
Spindle speed100 - 5’000 min-1
Spindle throughbore (without drawbar)20 mm
Maximum throughbore with collet W2014,5 mm
Headstock W25
Spindle for “ScHauBLin” colletsW25
Spindle speed100 - 5’000 min-1
Spindle throughbore (without drawbar)25 mm
Maximum throughbore with collet W2519 mm
Lever-operated quick-closing attachment (option)
Maximum spindle speed3000 min-1
Carriage
Manual moving of carrage on bed442 mm
Maximum transverse stroke, X-axis100 mm
Resolution, X-axis (on radius)0.01
Trapezoidal screw, Ø x pitch9 x 2 mm
Maximum longitudinal stroke, Z-axis90 mm
Resolution, Z-axis0.01
Trapezoidal screw, Ø x pitch9 x 2 mm
Lead screw
Maximum carriage stroke on bed-
Trapezoidal Lead screw, Ø x pitch-
Working feeds, Z-axis-
Tooling system: Linear
Maximum tool size (MuLTiFiX system)10 x 10 mm
Maximum tool size (TRiPansystem)10 x 10 mm
Bar holder Ø (MuLTiFiX system)20 mm
Bar holder Ø (TRiPansystem)12 mm
Screw-operated tailstock
Spindle taperMORSE 2
External diameter of the spindle30 mm
Spindle stroke80 mm
Lever-operated tailstock (option)
Spindle taperW20 / W25
External diameter of the spindle40 mm
Spindle stroke100 mm
Coolant supply (option)
Tank capacity-
Power of the pump-
Overall dimensions and weight
approximate net weight of the machine350 kg
Loadfloor256 kg/m2
Overall dimensions (LxDxH) in mm2’000 x 800 x 1’550
 

Bench / Headstock

Schaublin 102 N-CF Bench / Headstock fixing bolt, T-support, sawing table, perforated-disc dividing attachment, drawbar, arbor for drill, 6-jaw chuck, combined adjustable extractor, faceplate, raised clamp, 3-jaw chuck, hardened driving dogs...

Carriage

Schaublin 102 N-CF Carriage carriage, lever-operated carriage, screw mounted on ball bearing, control lever for bottom slide, turret for MULTIFIX-Aa quick-change, tool holder, cutting-off blade, TRIPAN, milling attachment, Inclinable headstock, quill, dividing head, microscope, grinding attachment, cutting-off carriage...

Grinding and milling attachment

Schaublin 102 N-CF Grinding and milling attachment Integrated motor version for grinding and milling attachment VALID FOR ALL 102 LATHES.

Tailstock

Schaublin 102 N-CF Tailstock tailstock, Lever-operated drilling tailstock, male and female centre, revolving centre, drilling V, Arbour for drill, drill chuck with automatic gripping, drilling plate...

Turret carriage

Schaublin 102 N-CF Turret carriage turret carriage, drill chuck, rotary bar stopp, reduction bush, self-releasing tap holder, self-opening die holder, combined boring, turning, and facing toolholder, sliding toolholder, knurl holder...

Schaublin 102 Mi-CF

Schaublin 102 Mi-CF
 
This lathe is equipped with an integrated motor (model identification Mi), which has been designed for speeds up to 6,000 rpm. Due to the direct spindle drive, the integrated motor reduces vibrations.

  1. Max. permissible swing over bed :   130 mm
  2. Maximum distance between centres :   275 mm
  3. Main spindle, Performance continuous operation (bench/cast iron base) :   1.5 kW / 4.2 kW
  4. Spindle speed, infi nitely variable :   100 - 5‘000 min-1
  5. Max. bar capacity with W20/W25 collet :   14.5 mm / 19 mm
  6. Manual travel of the slide on the bed :   442 mm
  7. Stroke, X axis / Z axis :   100 mm / 90 mm
Schaublin 102 Mi-CF - Technical specifications
Capacities
Maximum swing over bed 200 mm
Maximum swing over carriage120 mm
Height of centres over bed102 mm
Height of centres over carriage20 mm
Maximum distance between centres470 mm
Length of the bed1’000 mm
Height of the bed168 mm
Principal spindle ; by AC motor drive
Power continuous1,5 kW
Headstock W20 / W25
Spindle for “ScHauBLin” colletsW20 / W25
Spindle speed100 - 6’000 min-1
Spindle throughbore (without drawbar) W20 / W2520 mm / 25 mm
Maximum throughbore with collet W20 / W2514,5 mm / 19 mm
Lever-operated quick-closing attachment (option)
Maximum spindle speed3’000 min-1
Pneumatic chucking (option)
Maximum spindle speed6’000 min-1
adjustable axial clamping force, at 5 bars500 dan
Carriage
Manual moving of carrage on bed442 mm
Maximum transverse stroke, X-axis100 mm
Resolution, X-axis (on radius)0.01
Trapezoidal screw, Ø x pitch9 x 2 mm
Maximum longitudinal stroke, Z-axis90 mm
Resolution, Z-axis0.001
Trapezoidal screw, Ø x pitch9 x 2 mm
Tooling system: Linear
Maximum tool size (MuLTiFiX system)10 x 10 mm
Maximum tool size (TRiPansystem)10 x 10 mm
Bar holder Ø (MuLTiFiX system)20 mm
Bar holder Ø (TRiPansystem)12 mm
Screw-operated tailstock
Spindle taperMORSE 2
External diameter of the spindle30 mm
Spindle stroke80 mm
Lever-operated tailstock (option)
Spindle taperW20 / W25
External diameter of the spindle40 mm
Spindle stroke100 mm
Starwheel-operated tailstock (option)
Spindle taperW20 / W25
External diameter of the spindle40 mm
Spindle stroke150 mm
Fixed steady (option)
capacity of stationary steady, Ø70 mm
Coolant supply (option)
Tank capacity-
Power of the pump-
Overall dimensions and weight
approximate net weight of the machine360 kg
Loadfloor263 kg/m2
Overall dimensions (LxDxH) in mm2’000 x 800 x 1’370
 

Bench / Headstock

Schaublin 102 N-CF Bench / Headstock fixing bolt, T-support, sawing table, perforated-disc dividing attachment, drawbar, arbor for drill, 6-jaw chuck, combined adjustable extractor, faceplate, raised clamp, 3-jaw chuck, hardened driving dogs...

Carriage

Schaublin 102 N-CF Carriage carriage, lever-operated carriage, screw mounted on ball bearing, control lever for bottom slide, turret for MULTIFIX-Aa quick-change, tool holder, cutting-off blade, TRIPAN, milling attachment, Inclinable headstock, quill, dividing head, microscope, grinding attachment, cutting-off carriage...

Grinding and milling attachment

Schaublin 102 N-CF Grinding and milling attachment Integrated motor version for grinding and milling attachment VALID FOR ALL 102 LATHES.

Tailstock

Schaublin 102 N-CF Tailstock tailstock, Lever-operated drilling tailstock, male and female centre, revolving centre, drilling V, Arbour for drill, drill chuck with automatic gripping, drilling plate...

Turret carriage

Schaublin 102 N-CF Turret carriage turret carriage, drill chuck, rotary bar stopp, reduction bush, self-releasing tap holder, self-opening die holder, combined boring, turning, and facing toolholder, sliding toolholder, knurl holder...

Schaublin 102 N-VM-CF

Schaublin 102 N-VM-CF
 
A proven machine which is highly renowned for its advantages and manifold possibilities of use. This machine consists of more than 800 mechanical parts and is equipped with a lead screw. It is ideal for machining threads and other special workpiece features. Equipped with W25 collet.

  1. Max. permissible swing over bed :   200 mm
  2. Maximum distance between centres :   450 mm
  3. Main spindle, Performance continuous operation :   4.2 kW
  4. Spindle speed, infi nitely variable :   100 - 3‘000 min-1
  5. Max. bar capacity with W20/W25 collet :   14.5 mm / 19 mm
  6. Stroke, X axis / Z axis :   400 mm
  7. Maximum carriage stroke on bed :   100 mm / 90 mm
Schaublin 102 N-VM-CF - Technical specifications
Capacities
Maximum swing over bed 200 mm
Maximum swing over carriage120 mm
Height of centres over bed102 mm
Height of centres over carriage20 mm
Maximum distance between centres450 mm
Length of the bed1’000 mm
Height of the bed168 mm
Principal spindle ; by AC motor drive
Power continuous4,2 kW
Headstock W20
Spindle for “ScHauBLin” colletsW20
Spindle speed100 - 3’000 min-1
Spindle throughbore (without drawbar)20 mm
Maximum throughbore with collet W2014,5 mm
Headstock W25
Spindle for “ScHauBLin” colletsW25
Spindle speed100 - 3’000 min-1
Spindle throughbore (without drawbar)25 mm
Maximum throughbore with collet W2519 mm
Lever-operated quick-closing attachment (option)
Maximum spindle speed3000 min-1
Carriage
Manual moving of carrage on bed-
Maximum transverse stroke, X-axis100 mm
Resolution, X-axis (on radius)0.01
Trapezoidal screw, Ø x pitch9 x 2 mm
Maximum longitudinal stroke, Z-axis90 mm
Resolution, Z-axis0.01
Trapezoidal screw, Ø x pitch9 x 2 mm
Lead screw
Maximum carriage stroke on bed400 mm
Trapezoidal Lead screw, Ø x pitch40 x 4 mm
Working feeds, Z-axis0,02 - 0,3 mm
Tooling system: Linear
Maximum tool size (MuLTiFiX system)10 x 10 mm
Maximum tool size (TRiPansystem)10 x 10 mm
Bar holder Ø (MuLTiFiX system)20 mm
Bar holder Ø (TRiPansystem)12 mm
Screw-operated tailstock
Spindle taperMORSE 2
External diameter of the spindle30 mm
Spindle stroke80 mm
Lever-operated tailstock (option)
Spindle taperW20 / W25
External diameter of the spindle40 mm
Spindle stroke100 mm
Coolant supply (option)
Tank capacity23 l.
Power of the pump0.12 k W
Overall dimensions and weight
approximate net weight of the machine660 kg
Loadfloor1’785 kg/m2
Overall dimensions (LxDxH) in mm1’500 x 510 x 1’550
 

Bench / Headstock

Schaublin 102 N-CF Bench / Headstock fixing bolt, T-support, sawing table, perforated-disc dividing attachment, drawbar, arbor for drill, 6-jaw chuck, combined adjustable extractor, faceplate, raised clamp, 3-jaw chuck, hardened driving dogs...

Carriage

Schaublin 102 N-CF Carriage carriage, lever-operated carriage, screw mounted on ball bearing, control lever for bottom slide, turret for MULTIFIX-Aa quick-change, tool holder, cutting-off blade, TRIPAN, milling attachment, Inclinable headstock, quill, dividing head, microscope, grinding attachment, cutting-off carriage...

Grinding and milling attachment

Schaublin 102 N-CF Grinding and milling attachment Integrated motor version for grinding and milling attachment VALID FOR ALL 102 LATHES.

Tailstock

Schaublin 102 N-CF Tailstock tailstock, Lever-operated drilling tailstock, male and female centre, revolving centre, drilling V, Arbour for drill, drill chuck with automatic gripping, drilling plate...