| Technical characteristics | |
| Height of centres over carriage | 40 mm |
| Maximum turning diameter | 200 mm |
| Turning length with collets W20/W25 | 200 mm |
| Distance between centers | 220 mm |
| Spindle for “SCHAUBLIN” collets | W20 / W25 |
| Spindle speed | 50 - 8’000 min-1 |
| Power continuous / intermittent | 7,5 / 9 kW |
| C axis - Max. use | 20% |
| Continous / intermittent torque | 11.9 / 14.3 mm |
| Programmable increment | 0,001° |
| Spindle stop | Yes |
| Spindle throughbore with clip (without drawbar) W20 / W25 | 17 mm / 21 mm |
| Maximum throughbore with collet W20/W25 | 14.5 mm / 19 mm |
| Adjustable axial clamping force, at 5 bars | 500 daN |
| Maximum spindle speed | 6’000 min-1 |
| Transverse stroke, X-axis | 150 mm |
| Resolution, X-axis (on radius) | 0.00005 mm |
| Ball screw, Ø x pitch | 20 x 4 mm |
| Longitudinal stroke, Z-axis | 240 mm |
| Resolution, Z-axis | 0.0001 mm |
| Ball screw, Ø x pitch | 20 x 4 mm |
| Rapid feed, X- and Z-axis | 16 m / min |
| Number of radial toolholder (according to Ø of the piece) | 2 |
| Number of frontal toolholder (according to Ø of the piece) | 2 -> 5 |
| Maximum tool size (MULTIFIX / SMSA) | 12 x 12 mm |
| Clamping tools for collets | ESX 20 / ESX 9 |
| Milling and Grinding attachment (options) | Yes |
| Spindle taper | MORSE 2 |
| Stroke | 250 mm |
| Possibility of the motorized tailstock | Yes |
| Number of tool station | 12 |
| Number of rotating tool station | 6 |
| Standardized fixing of toolholders | VDI 16 |
| Maximal speed | 6000 RPM |
| Power continuous / intermittent | 1 / 1.3 kW |
| Torque continuous / intermittent | 3 / 7.5 Nm |
| Tank capacity | 55 l. |
| Pump capacity | 10 l/min |
| Pump pressure | 0,5 bar |
| Approximate net weight of the machine | 1100 kg |
| Overall dimensions in mm L x D x H | 1’734 x 1007 x 1’590 |
| Capacities | |
| Height of centres over carriage | 40 mm |
| Maximum turning diameter | 80 mm |
| Maximum turning length: W25 | 150 mm |
| Distance between centers | 600 mm |
| Spindle W25 | |
| Spindle for “Schaublin” collets | W25 |
| Spindle speed | 50 - 7000 RPM |
| Power continuous / intermittent | 5/6 kW |
| Torque continuous / intermittent | 26.1 Nm / 35.1 Nm |
| Programmable increment, C-axis | 0.0001° |
| Spindle stop | Yes |
| Spindle throughbore with clip (without drawbar) W25 | 21 mm |
| C Axis | Yes |
| Maximum throughbore with collet | 19 mm |
| Pneumatic clamping | 538 daN |
| Carriage | |
| Transverse stroke, X1 / X2 axes | 150 mm |
| Programmable increment, X-axis (diameter) | 0.0001 mm |
| Ball screw, Ø x pitch | 20 x 5 mm |
| Longitudinal stroke, Z1 / Z2 axes | 300 mm |
| Programmable increment, Z-axis | 0.0001 mm |
| Ball screw, Ø x pitch | 32 x 10 mm |
| Rapid feed, X- and Z-axes | 20 m/min |
| Tooling system: Linear | |
| Number of radial toolholder (according to Ø of the piece) | 4 |
| Number of frontal toolholder (according to Ø of the piece) | 2 → 5 |
| Maximum tool size (MULTIFIX / SMSA) | 12 x 12 mm |
| Clamping tools for collets | ESX 20 / ESX 9 |
| Milling and Grinding attachment (options) | Yes |
copyright © 1998 - 2024 Greub Machines SA
All products, logos, trademarks or registered trademarks shown or mentioned belong to their respective owners.
